Self Erecting Cranes
HDT80
Specifications
The HDT 80 is designed with jobsite efficiency and flexibility in mind. Rapid assembly and erection ensure maximum uptime on the site while compact dimensions and shorWe considered the ground adjustments needed to avoid making tire ruts with a rough-terrain crane and decided to use a self-erecting crane instead,” he said. “Our operators found these cranes extremely easy to erect and operate. I would recommend them to other contractors.”
There was significantly less ground preparation required for the Potain self-erecting cranes. Another feature that adds to the efficiency of self-erecting cranes is the remote control. The remote allows operators to stay with the load they are picking and help guide it into place. This eliminates some of the chance of error in hand signals and communication between the crane operator and a worker guiding the load into place.
Potain self-erecting cranes also have a minimal environmental impact. The cranes employ electric motors, which have no engine emissions; reduced fuel costs and are very quiet. And, quiet cranes are particularly important when working in a close campus setting, Whitt said.
“The fact that these cranes operate very quietly is certainly an asset for contractors working in close proximity to other commercial or educational facilities,” Malek said. “Furthermore there are no fumes from a diesel engine, which suits a lot of working locations.” t rear slewing radius allow the crane to be set up in close proximity to structures.
LOAD CHART
6.6 USt
1.5 USt
112.2 ft
147.6 ft
Features
- 3 different mast heights
- Multiple jib configurations
- Optional wireless remote
- 480v power source
- 176.2 ft maximum hook height with jib at 30º
- Optional mast-mounted movable cab
HD-25
Canadian Professional Crane Inc. Supplying Self-Erecting crane rental with or with out crane operator
The (HD-25) is a small Self-Erecting Tower Crane 61’ (18.5M) & or 86’ (26’5M) under hook.
The Jib reaches 89’ and lifts 1760 lbs (800 kg) at the tip. Maximum lift 4,410 lbs.
Operates quietly and pollution free, completely environmentally friendly, low monthly rental.
In less than Four hours the crane can be setup and put to work, Canadian Professional Crane Inc. Also, we can supply you with Certified Hoisting Engineer if required, (Crane Operators) for all our cranes. The operators can operate easily any where on site with their remote control, quick sit up.
View Details:
HD-25 Self Erecting Crane Load Chart
GA 136 TOWER CRANE
Canadian Professional Crane Inc. & Matti Crane are the new dealers for FB GRU! A Self Erecting Crane from Italy.
Canadian Professional Crane Inc. & Matti Crane Inc. will represent FB GRU in USA, Canada, as of November 2016.
We are offering a crane that is clean, with no pollution and low maintenance costs.
The Owner Of Canadian Professional Crane Inc. will have offices in Calgary and Toronto now.
The first crane we are offering is the GA 138 with 124 feet of boom radius & a maximum capacity of 8800 lbs. The GA 138 is a crane that is clean, produces no pollution and has low maintenance & operating costs. This crane is very safe to own and operate.
With purchase, we offer training and a one year warranty.
Compared to 50 ton mobile crane, at 124 feet Radius:
- The 2017 crane GA 138 has got one jib version – Divisible and removable erection ballast blocks
- Works with folded jib, both in horizontal and luffed position
- All the winches and all the limit switches are in the lower part of the crane
- Erection pump driven by inverter for the control of the erection speed of the crane!
- kg 2000 or 2200 Lbs maximum load with two falls of rope
- kg 4000 or 8800 Lbs maximum load with four falls of rope
- Jib length: 124′ feet 38.00 m
- Standard height: 70′ feet 21.5 m
The GA 136 has got one jib version and the following characteristics:
- Hoisting, trolley and slewing mechanisms with three speeds
- Transport axle FB25K1 for crane towing up to 25 km/h (Optional) TÜV-SÜD certification
- Divisible and removable erection ballast blocks
- Possibility to work with folded jib, both in horizontal and luffed position
- 1000 kg of maximum load with folded jib
- Trolley-out limit switch for folded jib with automatic positioning
- Mini derrick (optional)
- Reduced slewing ratio contained inside the bearing legs
- Steel shaped electric cubicle and accessories box
- All the winches and all the limit switches are in the lower part of the crane
- Erection pump driven by inverter for the control of the erection speed of the crane
- 2000 kg maximum load whit two falls of rope
- 4000 kg maximum load whit four falls of rope
Download
Download
Download